Building a stand for 120P

**CL_** · 07-19-2010, 08:42 AM

Made of 2 layers of 3/4 inch pine plywood glued and screwed together. I have to say, glue really makes a huge difference (as does wood filler

). The tricky part comes tomorrow when I attempt to stain it. It's turned out nice so far, and I don't want to ruin it with a bad stain job. (I will be practicing on some leftover ply) Do any of you guys have any preference on whether to use a rag or brush? I've read several articles on staining pine tonight, but I'm still a little nervous, and would love to hear any tips you might have.
Thanks,
Chris

**Joe3329** · 07-19-2010, 12:56 PM

Nice job on your stand. Pine is notoriously difficult to stain evenly. It tends to get blotchy. I've tried a number of prestain treatments to try to minimize the blotchiness, but nothing works any better than a 1 pound cut of dewaxed shellac. You can buy Zinsser SealCoat at most Home Depots or Lowes and mix it 50/50 with denatured alcohol to get an approximate 1 pound cut. It is probably easiest to apply this with a brush. It will dry very fast, so don't overbrush it. After the shellac has dried for a half hour apply the stain as directed on the can. I prefer using a rag for most oil based stains.

Gel stains have a reputation for minimizing the blotchiness on some woods. I don't have much experience with them. The few times I have tried them I found them to be difficult to use. They tend to dry too fast on large projects like your stand.

Good luck with your project.

Oh, by the way, Miracles in Glass in Toronto, Canada builds very nice tanks. They just built a Starphire 120 gal. tank for me, and I am very impressed with their work. Great people to work with and reasonable prices, too, considering the quality of the finished product.

**Tom Barr** · 07-19-2010, 04:23 PM

Good job, this will last a long long time.

Regards,
Tom Barr

**shoggoth43** · 07-19-2010, 05:16 PM

Looks good. I pretty much did the same with my 120. I got the longer version though. Since I didn't like the pine look and wasn't going to splurge on the plywood by buying cabinet grade, I went to a flooring place. I snagged a bundle of unfinished white oak planks and glued that to the outside of the plywood. Makes for a very nice looking stand since the oak takes stain very well and also provides a little extra support.

It looks like you went with one of the ADA style stand designs correct?

-
S

**CL_** · 07-19-2010, 08:10 PM

Thanks guys!

Originally Posted by Joe3329

Nice job on your stand. Pine is notoriously difficult to stain evenly. It tends to get blotchy. I've tried a number of prestain treatments to try to minimize the blotchiness, but nothing works any better than a 1 pound cut of dewaxed shellac. You can buy Zinsser SealCoat at most Home Depots or Lowes and mix it 50/50 with denatured alcohol to get an approximate 1 pound cut. It is probably easiest to apply this with a brush. It will dry very fast, so don't overbrush it. After the shellac has dried for a half hour apply the stain as directed on the can. I prefer using a rag for most oil based stains.

Gel stains have a reputation for minimizing the blotchiness on some woods. I don't have much experience with them. The few times I have tried them I found them to be difficult to use. They tend to dry too fast on large projects like your stand.

Good luck with your project.

Oh, by the way, Miracles in Glass in Toronto, Canada builds very nice tanks. They just built a Starphire 120 gal. tank for me, and I am very impressed with their work. Great people to work with and reasonable prices, too, considering the quality of the finished product.

Thanks! I got Cabot wood conditioner yesterday at Lowes while I was there. TBH, I had never heard of Cabot before, but it was $11/ quart, so I assumed (?) it was decent quality (I know- not the best plan) I will be testing today on some scrap pine. Hopefully I can get it to turn out ok. Thanks for the tips!
I've heard about Miracles in Glass on some reef forums. How do the seams look?

Originally Posted by Tom Barr

Good job, this will last a long long time.

Regards,
Tom Barr

Thanks! That's the plan

The wood only cost me $57. Stain and hardware probably almost doubled that cost. Still not bad, IMO

Originally Posted by shoggoth43

Looks good. I pretty much did the same with my 120. I got the longer version though. Since I didn't like the pine look and wasn't going to splurge on the plywood by buying cabinet grade, I went to a flooring place. I snagged a bundle of unfinished white oak planks and glued that to the outside of the plywood. Makes for a very nice looking stand since the oak takes stain very well and also provides a little extra support.

It looks like you went with one of the ADA style stand designs correct?

-
S

Thanks! I've done the plank thing you mentioned, but it didn't turn out as nice as I would've liked (though, I didn't get high quality flooring planks- probably the reason right there. I think that's a good idea, actually.) The thing is my stand is going to be flush with the tank. I also want the exposed edges of the plywood. Looks modern, IMO.
I got my inspiration for the stand from
http://www.aquaticplantcentral.com/f...new-setup.html
and kimcadmus' stand here
http://www.plantedtank.net/forums/875677-post118.html

Thanks for all of the help guys!

**Joe3329** · 07-19-2010, 10:28 PM

My tank is 48" x 24" x 24" and has no frame or braces. The seams are black silicone and are first rate. The tank is drilled for a 1 1/2" drain and a 1" return. It is 1/2" Starphire on the front and both ends. The bottom is 5/8" and was tempered after it was drilled. Less than $1000 delivered truck freight to southern NY state. I was very pleased.

**shoggoth43** · 07-19-2010, 10:34 PM

I ended up dropping my tank "inside" the edges of the stand. So the tank is flush with the plywood for the most part, and the stained oak planks come up around the lower edge of the tank. The exposed edges in the photos look much better than I would have thought they would.

OTOH, I haven't quite gotten the hang of the "just enough and then some" part of building the stand. Mine could probably hold up a truck without issues. But it looks pretty, as long as you're far enough away not to point out all the oopses in the finish.

-
S