Hi, I have problem with my co2 output that it seems to drop lower every next day when the co2 start. This happens after I switch back to GLA in-tank atomic diffuser that has not been used for half year.
Here is the story, I adjust my co2 output to 7bps in the morning, it stays stable till night when co2 is off. But then when the co2 start in the next day, the bps would drop to 2 bps. I need to twist the needle vale left and right everyday in order to make the co2 back to 7bps, note that I did not keep turning the needle vale higher but twisting it left and right.
I use FE with one stage regulator and solenoid, the working pressure is preset to 45psi and it can not be change.
I use the GLA in-tank atomic diffuser, it required 30psi to work, I also have co2 pressure tubing.
I need help to find out where the problem is.