Aquarium Plants - Barr Report  
Go Back   Aquarium Plants - Barr Report > Barr Report > General Plant Topics
Reload this Page General plant concerns and questions, my 29g *pics*
General Plant Topics General Plant Topics and Aquatic Life discussions

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
General plant concerns and questions, my 29g *pics*
Old
  (#1 (permalink))
ir0n_ma1den is Offline
Junior Poster
Poster
Question General plant concerns and questions, my 29g *pics* - 02-06-2008, 08:32 PM

I've posted this in my journal on APC and TPT, and have decided to post it here as I have some questions and concerns.

Quote:
A little bit of an update:

First, I bought some stems of Red Ludwigia at Petsmart as suggested by people on this board. Things seem to be growing as my Rotala's tips are now a bright green.

But I do have a few concerns:

When I received the Blyxa, it had transparent leaves, those are peeling off and I can now see some healthier looking leaves. I am guessing that this is just a melting stage, right.



My Cyprus Helferi's long leaves are all turning yellow brown, so they are definitely dying, but there are smaller green leaves at the base. I am also guessing that this is just a melting phase, right? Also, on the small baby plantlets, I am getting this white fungi looking stuff on the grain part of the plant.



  
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
Old
  (#2 (permalink))
ir0n_ma1den is Offline
Junior Poster
Poster
02-06-2008, 08:32 PM

Heres the other part:
Quote:
About Half of my HC plantlets and getting dull and seem like they are dying, but I am not sure. Can someone diagnose this?





  
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
Old
  (#3 (permalink))
ir0n_ma1den is Offline
Junior Poster
Poster
02-06-2008, 08:33 PM

And the last part:

Quote:
I haven't witnessed any pearling yet, so do you think I should turn up the CO2? Another thing about my CO2 is that the diffused bubbles are cling to the water's surface. I don't know if this is good or bad.

On the brighter side of things, here is an FTS:




thanks
  
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
Old
  (#4 (permalink))
Tom Barr is Offline
Administrator
Admin
 
Tom Barr's Avatar
02-06-2008, 11:06 PM

Remove the spray bar.

Have the flow go along the top back wall of the tank, then down, blasting the mist from the diffuser all over.

That should help a lot.

Not sure what the light is.

Regards,
Tom Barr
  
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
Old
  (#5 (permalink))
ir0n_ma1den is Offline
Junior Poster
Poster
02-07-2008, 02:52 AM

The diffuser is now directly under the intake, but I may end up taking out the diffuser and just sticking the tubing in the intake.

The lighting is 1x65w.

I'll remove the spray bar and see how my tank reacts.

thanks
  
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
Old
  (#6 (permalink))
VaughnH is Offline
Lifetime Charter Member
Approaching Guru Status
 
VaughnH's Avatar
02-07-2008, 03:43 AM

Aquarium Plumbing: Directional U-Tube works very well in place of a spray bar, and it lets you direct the flow any direction you like without getting a blast of fast moving water.


Hoppy
  
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
Old
  (#7 (permalink))
ir0n_ma1den is Offline
Junior Poster
Poster
02-10-2008, 04:58 AM

I just added this update today:
Quote:
Heres a bit of an update:
I have been fiddling with the equipment and I like it so far. I took off the spray bar like Tom Barr told me to, I moved the heater down, and I took out the diffuser. without the spray bar, I am getting good flow and a 100% CO2 diffusion. I can finally start to see pearling!


some not so good news:
I am pretty sure the macrandra is dead/dying, but thats not a big problem. I am also getting this white fuzz stuff on my cyprus and some other plants.


I got a reply by one person that said I might have mistook your information now that I have the diffuser gone. That person told me to put the spray bar back on and point it down at the front pane of glass. which method should I use?

Also, does pointing the CO2 enriched water in the direction of a plant benefit it, or does it not matter?

thanks
  
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
Reply



Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On

Points Per Thread View:
Points Per Thread:
Points Per Reply:



Powered by vBulletin Version 3.6.0
Copyright ©2000 - 2008, Jelsoft Enterprises Ltd.
LinkBacks Enabled by vBSEO 3.0.0 RC5


1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69