View Single Post
DIY - C02 tank stays - keep tank in place
Old
  (#1 (permalink))
Gerryd is Online
Lifetime Charter Member
Approaching Guru Status
Location: South Florida
DIY - C02 tank stays - keep tank in place - 11-20-2007, 04:27 AM

I use simple eye hooks and small elastic cords to hold my 5 or 10 lb c02 bottle in place. Cost < $5 at Home Depot.

Takes 4 eye hooks that screw directly into the cabinet (inside), 2 on each side of the cylinder and spaced appropriately.
Place the cylinder between the hooks and hook one end of each strap to the eye hook and you are all set. Since diameter of 5 and 10 lb is the same, no change there.....

Pic is worth a thousand words.

Look for the blue bungee cords and the eye hooks around the cylinder........

Hope this helps.
Attached Images
File Type: jpg IM001893.JPG (84.7 KB, 77 views)


Gerry.
  
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote